1. 

   chooky
   Beta Veteran

   Install failed at
   Execute: "C:\Program Files (x86)\eBoostr\eBoostrCP.exe" -installdriver

   Will try again after reboot as suggested by installer.

   Posted 2 years ago #
2. 

   chooky
   Beta Veteran

   Second install worked without problems. Win 7 x64

   speed check

   ---------------------------
   eBoostr : Control Panel
   ---------------------------
   Direct access speed: 230.091888 MB/s

   Cache enabled access speed: 1063.944824 MB/s

   Ratio: 4.624000
   ---------------------------
   OK
   ---------------------------

   Auto config recommended 1023GB RAM cache out of 4GB which is a bit small in my opinion 1.5GB - 2GB is better.

   Posted 2 years ago #
3. 

   Art
   Member

   Hi,
   My old desk (an7,xp32,sp3,3gB) was instable with the previous version, but the current 543 work fine.
   I would suggest to remove or reduce the decimal places of the speed report, for example:
   1063.944824 MB/s -> 164 MB/s
   Att
   Art

   Posted 2 years ago #
4. 

   PangOS
   Beta Veteran

   chooky wrote:
   Second install worked without problems. Win 7 x64

   speed check

   ---------------------------
   eBoostr : Control Panel
   ---------------------------
   Direct access speed: 230.091888 MB/s

   Cache enabled access speed: 1063.944824 MB/s

   Ratio: 4.624000
   ---------------------------
   OK
   ---------------------------

   Auto config recommended 1023GB RAM cache out of 4GB which is a bit small in my opinion 1.5GB - 2GB is better.

   This is SSD right? U didn't mention.

   Posted 2 years ago #
5. 

   chooky
   Beta Veteran

   2 x OCZ Vertex 30GB RAID 0. Quick isn't it!

   Posted 2 years ago #
6. 

   Art
   Member

   Correction >> I would write >> 1064 MB/s

   Chooky, 230 MB/s are the ssd (sata 2 raid 0)?

   Posted 2 years ago #

RSS feed for this topic

Reply

You must log in to post.