Build cache fail and eBoostr service stopped
By spectra9 | December 3rd, 2008 | 11:25 am
Using build 473, WinXP SP3, 1GB RAM.
I’ve set up a 128MB of system memory cache on drive C: and all went smoothly. Later, I add a 2GB HD cache on my secondary harddisk and proceed to build the cache. However, this time the build process failed after reaching some random percentage and the system status reads “Pause”. I can try building the cache again but eventually the system status will read “Service is not running”. I’ve tried changing the order of creation (i.e HD cache first and RAM later, the build is successfull for the HD, but failed after adding the RAM cache). Event viewer logs the following error:
System Exception -1073741819 in eBoostr Service.
This never happen will the older builds
Dec 04, 2008
Thank you for your report. We are unable to determinate the problem for now but service memory dump will be available in future versions. Hope it helps
Dec 05, 2008
I’ve tried it on a slightly older machine just for kick:
Pentium 4 2.8 GHz
WinXP Pro SP2
512 MB RAM
I create 64 MB system memory cache and later a 256 MB Kingston USB flashdisk.
This time the build cache process is successfull, no exception in event viewer. Hmm, what could be the cause. And why it only occurs with this build. Guess I’ll wait for the mem dump feature then…
Dec 19, 2008
Build 479 fix this issue. So far, no more error has been logged in event viewer. Will update if anything changes